Recently there are several friends consult me that if SFP optical module can be used alone? And how about connecting to the SFP module? Therefore now I will introduce the characteristics of the two fiber optic equipment as a staff working in Fiberstore.
The differences between the SFP optical module and optical transceiver:
1. The SFP optical transceiver belongs to the accessories, usually only in switches and equipment in use with the SFP slot. Optical transceiver can be used alone
2. The SFP optical transceiver support hot plug, flexible configuration.Fiber optic transceivers are fixed specifications, it is difficult to replace the upgrade.
3. The SFP optical transceiver supply power through the equipment, optical transceiver power alone.
SFP optical module and optical transceiver how to connect to:
1. SFP optical module and optical transceiver rate must be consistent, MB to MB, gigabit to gigabit.
2. The same as wavelength, they are all 1310 nm or 850 nm
3. Single fiber of single fiber, double fiber of double fiber.
Through flexible collocation between the SFP optical module and optical transceiver, you can build a variety of network structure. At the same time Fiberstore also introduced SFP optical transceiver, can be used alone, Through the SFP optical module hotplug can upgrade flexible configuration. For example, SFP-10G31-10-FI. This module is designed for single mode fiber and operates at a nominal wavelength of 1310 nm. It is with the SFP+ 20-pin connector to allow hot plug capability. Fiberstore can supply SFP-10G31-10-FI according to your requirements, and design SFP-10G31-10-FI label and packaging for your company.
In fact, as we know, many well-known telecommunication companies produce fiber optical devices,and we also developed some types of fiber optic transceivers, they include compatible SFP optical module, CWDM SFP transceiver and DWDM SFP Transceiver
and copper SFP transceivers . these compatible SFP transceivers modules are 100% compatible with major brands as follows and backed by a lifetime warranty. There is a very personalized service is that you can click your desired compatible brand to see the corresponding optics. Then we can customize SFP transceiver modules to fit your specific requirements. Such as Juniper SFP, Dell SFP, Brocade SFP, Avaya SFP, Huawei SFP Transceiver, Dell SFP Transceiver, Netgear SFP Transceiver, D-Link SFP Transceiver, HP SFP Transceiver, Cisco SFP Transceivers.
As for CWDM SFP optical module, it is a convenient and cost-effective solution for the adoption of Gigabit Ethernet and FC in campus, data-center, and MAN, with maximum optical budget 41dB, SFP CWDM modules support data rates from 100 Mbps up to 4.25 Gbps. There are 18 center wavelengths available from 1270 nm to 1610 nm, with each step 20 nm. These wavelengths are compliant to the ITU G.694 CWDM standard. And the different from the SFP CWDM transceivers, SFP DWDM transceivers provide a high-speed serial link at signaling rates from 100 Mbps to 2.5Gbps. The DWDM SFP modules meet the requirements of the IEEE802.3 Gigabit Ethernet standard and ANSI Fiber Channel specifications, and are suitable for interconnections in Gigabit Ethernet and Fiber Channel environments. DWDM SFPs are available in all 100 GHz or 50GHz C-band wavelengths on the DWDM ITU grid.
The WDM BiDi SFP optical module is a compact optical transceiver module which is used in optical communications for both telecommunication and data bidirectional communications applications. It interfaces a network device mother board (for a switch, router or similar device) to a fiber optic or unshielded twisted pair networking cable. It is a popular industry format supported by several fiber optic component vendors. It has different types of WDM BIDI SFP optical transceivers, such as Fast Ethernet (FE) BiDi SFP, Gigabit Ethernet (GE) BiDi SFP, 155M BiDi SFP, 622M BiDi SFP, 2.5G BiDi SFP, 10G BIDI SFP
Copper SFP optical module uses a copper line for linking. They are suitable to use with the equipment and devices that are with copper SFP slots or ports. The popular copper SFP transceivers are 10G Copper SFP. They are built to comply with MSA (Multi-Sourcing Agreement) standards to offer a cost-effective way to add, replace or upgrade a copper Ethernet port on your 10/100/1000Base-T networking equipment.
Many kinds of transceivers in Fiberstore is working with 30% of the price discount, and welcome to your online consulting at Fiberstore.